p h i g a g u i t a r s |
|
This is one of my hand-made
custom-stock solid through-neck body "Lightning Bolt Jerry
Garcia Tribute guitars" (B4-09) .Set
up similar to Cripe's original. The figured hardwoods used are handpicked for tone and figure with no color or stain added. I used a similar method of construction as the late Cripe except for the volute, which is hand carved. Cripe glued the entire headstock to the neck. Mine is one piece. It includes a new hardshell case. Check the details to the right. Email me with any questions.
Cocobolo lightning bolt cap is
included. |
* Neck: texas oak, walnut, honduran mahog., purple heart, hand carved volute, thru-neck, purple heart back and cocobolo top * Neck Dimensions: 25 scale, 4.3cm at nut, 5.7 at end 12 radius, med "C"-rounded, 24 Fret: med. jumbo on rose- wood, graphtech nut and brass truss cover over two-way adjustable truss rod (in-bow/out-bow) * Body: Purple heart back, mahogany core, maple, 1/2" book-matched-carved cocobolo top, purple heart separators between body sides and neck * Cap: (not shown) cocobolo, abalone ring, mop lightning bolt--added below * Pickups: custom similar to Super 2s in every way, balanced, hand-made brass PU ring or super-2s * Electr: 2 Tone, 1 Vol (up/down sw.), 5-way switch, balanced coil tapped 3 x on/on switches added LP bridge/neck combination on volume switch * Bridge: 3-way adjustable roller bridge * Tail: thru-ferrules Ball valute at headstock for extreme comfort * Inlays: Irwin style mop, black side-position markers, wood zipper below creme binding. * Tuners: Sealed/gold * Construction: Hippi sandwich--no paper veneers * Sound: Warm/mids/highs * Weight: Medium 8 pounds * Sound: Strat and LP wrapped in one |
p h i g a g u i t a r s |
|
p h i g a g u i t a r s |
|
|
|